Guangdong Foshan Jiamei Si hardware factory Chinese | English
Consultation:Yu Mr
+86-18603083855
Home About Us Products Engineering Production Install live News Feedback Contact Us
About Us
Introduction
Production
Install live
Engineering
News
Feedback
Contact Us
News Your present position > Home > News Detail
Yuemei teaches you how to measure the stairs
One, indoor drawings supply attention:
Clear height:
A, indoor clear height: should be vertical height is calculated according to the ground to the ceiling or floor bottom. When the slab or the lower suspension member of the floor slab is effective, the vertical height of the slab should be calculated according to the ground structure.. If the beam, beam to the vertical height of the ground for height.
B, story: the ground to the upper floor of the lower floor of the ground between the distance. Storey contains height
Spot attention measurement dimension:
A, general layout: the accurate measurement of the length and width of walls, columns, doors and windows, equipment, water potential, and mark the spot size.
B, around the wall elevation: the accurate measurement of long, high, and battlements, columns, doors and windows, equipment, water potential, mark the spot size.
C, smallpox figure: the position of the accurate measurement of length, width, walls, columns, beams, fire hose, a ventilating pipe equipment size and marked elevation.
D, part of the construction Wailimian door size: pay attention to whether long, high size can extend
The following wall text notes:
A, hollow brick wall indicated;
B, ordinary brick, hard brick indicated;
C, reinforced concrete wall annotated;
D, plain concrete wall specify;
E, glass partition indicated:
F, wall reserved hole: dotted line depth, and on the elevation of the map marked its high and wide as figure:
G, wall reserved groove: dotted lines indicate its depth, and on the elevation of the map marked its high and wide as figure:
Dimensions note notes:
A, the elevation in meters (m) said, the rest by mm (mm)
B, the dimension line must be the starting and ending points, general use of dashes and dots indicate
C, the size of the number should be centered, the location is not available when the lead line tagging
Store drawings supplementary information:
A, to the property management, shopping malls management and other information store to obtain the construction plan, so that more understanding of the housing structure: which is the load-bearing wall, which is not load-bearing wall, which is the frame structure
B, market stalls and other places should be asked to know the following items: ceiling could be, how high do; ground the possibility of change; could be changed the original decoration, whether to use the envelope, how much electricity, standing outside the door is the longest and highest can achieve much
C, to understand clearly the facade construction size, the highest head part of the longest expansion, to prevent the super high and long
Two, outdoor drawings and the surrounding environment for the supply of attention:
A, shop adjacent bar mouth and business content
B, shooting the surrounding environment photos
Three. Other labeling: to arrange the store layout reasonably
A, socket, electric potential, water and electricity position detail (height, position size)
B, ventilation pipe, spray head, smoke sensor position said that the location of the fine (height, size)
C, open the door should be labeled (height, width), is open double door, or single door.Catalog printing Booklet printing
Top